If you are looking for ip addresses configured on the interface itself, I usually use the following:
root@srx100> show interfaces terse | match inet
fe-0/0/0.0 up up inet 1.1.1.1/24
sp-0/0/0.0 up up inet
sp-0/0/0.16383 up up inet 10.0.0.1 --> 10.0.0.16
fe-0/0/7.0 up down inet 192.168.3.1/24
lo0.0 up up inet 127.0.0.1 --> 0/0
lo0.16384 up up inet 127.0.0.1 --> 0/0
lo0.16385 up up inet 10.0.0.1 --> 0/0
st0.0 up up inet 10.0.0.1/24
vlan.0 up down inet 10.0.1.1/24