Hi
I'm trying to upgrade the software on an EX 4200 and am failing with all methods. I tried the J-Web 'Upload Package' option but get told that the image is not a Junos image:
The software package (jinstall-ex-4200-9.4R2.9-domestic-signed) was not a Junos package.
When I try the 'Install Package' and ftp://172.30.20.212/jinstall-ex-4200-9.4R2.9-domestic-signed I get a message htat the packege is being fetched, then I get an Installation Progress box(see below attachement)
When I try request system software add force ftp://172.30.20.212/jinstall-ex-4200-9.4R2.9-domestic-signed , I get the response that the switch is fetching the file and I can see it being transferred from my ftp server, but then I get the following message:
Fetching package...
Pushing bundle to fpc1
Validating on fpc1jinstall-ex-4200-9.4R2.9-domestic-signed
truncated or corrupted package: /var/tmp/mchassis-install.tgz
When I try ftp 172.30.20.212 from the cli, I connect to my remote station and perform a GET jinstall-ex-4200-9.4R2.9-domestic-signed, I am told there is not enough space left on the device... but these are out of the box.
ftp> get jinstall-ex-4200-9.4R2.9-domestic-signed
local: jinstall-ex-4200-9.4R2.9-domestic-signed remote: jinstall-ex-4200-9.4R2.9-domestic-signed
200 PORT command successful.
150 File status OK ; about to open data connection
93% |********************************************** | 100 MB 00:01 ETA
/: write failed, filesystem is full
93% |********************************************** | 101 MB 00:01 ETAftp: local: jinstall-ex-4200-9.4R2.9-domestic-signed: No space left on device
93% |********************************************** | 101 MB 00:01 ETA
226 Closing data connection; File transfer successful.
106101416 bytes received in 23.28 seconds (4.35 MB/s)
ftp> quit
221 Service closing control connection
From start shell, and cd /root, cd /var, cd /var/tmp, I see no residual images either retained from my attempts or anyone elses, but am I looking in the right place.
I had this same problem with the two development switches for this customer, but I found the images in the above diretories and deleted them, then installed without any problem.
These two switches will be part of a virtual-chassis in the prod environment, a previous VC Problem post refers to the switches in the development environment.
Thanks in advance to anybody that can point me in the right direction here.
Mooey