Hi,
I think this should be possible, but I couldn't get it working yet. The situation is as follows:
To our office we deliver a couple of QinQ VLANs on an interface, which is working fine. The next thing we want to do on the interface is bridging the inner vlan of a QinQ interface with a single VLAN on the other. This is what I currently have configured:
Interface where QinQ goes out:
interface ge-1/1/4 {
flexible-vlan-tagging;
encapsulation flexible-ethernet-services;
unit 5103 {
encapsulation vlan-bridge;
vlan-tags outer 0x8100.1 inner 0x8100.600;
}
}
This VLAN needs to be bridged with this interface:
interface ge-1/0/0 {
flexible-vlan-tagging;
encapsulation flexible-ethernet-services;
unit 600 {
encapsulation vlan-bridge;
vlan-id 600;
}
}
The bridge:
bridge-600 {
domain-type bridge;
vlan-id 600;
interface ge-1/0/0.600;
interface ge-1/1/4.5103;
}
Is there anything else I'm missing?
Marijn