Hi,
I've configured a standalone EX2300 with an ae interface, which connects to an EX-series virtual chassis.
This switch only has one ae uplink (with two interfaces), no other uplinks to any other switches.
When I bring up the interface it sends 3 or 4 BPDU's, and then stops. It receives plenty of BPDU's, but won't send them.
Any ideas?
xe-0/1/0 and 0/1/1:
ether-options {
802.3ad ae0;
}
chassis config:
aggregated-devices {
ethernet {
device-count 2;
}
}
ae0:
description Uplink;
unit 0 {
family ethernet-switching {
interface-mode trunk;
vlan {
members all;
}
}
}
BPDU's:
show spanning-tree statistics interface ae0
Interface BPDUs BPDUs Next BPDU TCs Proposal Agreement
Sent Received Transmission Tx/Rx Tx/Rx Tx/Rx
ae0 4 34 0 0/0 0/0 4/0