Hello! First post and hoping to get some help which im sure im totally missing something
Cisco guy here trying to get the hang of Juniper and so far ive been enjoying working with the device but I seem to be missing something with my BGP configuration!
I have a SRX 240b (JUNOS Software Release [11.2R4.3]) that I have the basic BGP configuration, the connection to the neighbor has been established and I can see routes from the other side however I for some reason cant advertise my internal routes even after going over the Juniper documentation!
http://www.juniper.net/techpubs/en_US/junos/topics/topic-map/bgp-peering.html
[edit protocols bgp group external-peers]
type external;
authentication-key SOMETHING SECRET HERE
export ebgp-export;
peer-as xxx;
local-as xxxxx;
neighbor x.x.x.x;
policy-statement ebgp-export {
from protocol [ direct local static ];
then accept;
As you can see I created the policy and created an export (which from my reading should advertise my local network routes into BGP correct?)
I have two networks on the router 10.2.6.x assigned to GE-0/0/0 and 192.168.1.1/24 to vlan0. The wan interface is GE-2/0/0
root> show route
inet.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.x.x.0/23 *[BGP/170] 00:19:14, localpref 100
AS path: xxxx I
> to x.x.x.x via ge-2/0/0.0
10.2.6.0/30 *[Direct/0] 03:03:21
> via ge-0/0/0.0
10.2.6.1/32 *[Local/0] 03:15:44
Local via ge-0/0/0.0
x.x.x.x*[Direct/0] 1d 01:02:35
> via ge-2/0/0.0
x.x.xx *[Local/0] 1d 01:02:38
Local via ge-2/0/0.0
192.168.1.1/32 *[Local/0] 03:25:12
Reject
Im pretty sure im missing something really stupid and im sure im gonna laugh when we get it working!
Thank you so much!!