Hi
I am trying to apply QoS firewall policy to PPPoE session in ipv6 mode. I used following configuration on dynamic profile for PPPoE connection:
Dynamic Profile Configuration |
cluser@vMX1> show configuration dynamic-profiles Virtual-Template1 interfaces { pp0 { interface-transmit-statistics; unit "$junos-interface-unit" { actual-transit-statistics; ppp-options { pap; mru 1430; mtu 1430; ignore-magic-number-mismatch; } pppoe-options { underlying-interface "$junos-underlying-interface"; server; } keepalives interval 120; family inet { filter { input "$junos-input-filter"; output "$junos-output-filter"; } unnumbered-address lo0.0; } family inet6 { filter { input "$junos-input-ipv6-filter"; output "$junos-output-ipv6-filter"; } address $junos-ipv6-address; unnumbered-address lo0.0; } } } } |
Also following cell shows the firewall configuration
Firewall configuration |
jcluser@vMX1> show configuration firewall family inet6 filter 2Mbps_ipv6 { interface-specific; term PROCESS { then { policer Policer_2M_Download; forwarding-class best-effort; accept; } } } filter 1Mbps_ipv6 { interface-specific; term PROCESS { then { policer Policer_1M_Upload; forwarding-class best-effort; accept; } } } |
The Policy-names are applied via following AVP:
217625test2 Cleartext-Password := "123456"
ERX-IPv6-Ingress-Policy-Name = 1Mbps_ipv6,
ERX-IPv6-Egress-Policy-Name = 2Mbps_ipv4,
The problem is subscriber is disconnected as soon as it is connected. The Policy itself has no issue. If I configure it directly in dynamic profile and do not pass the names in the AVP, It is connected and works fine..
What is the issue here?
Thank you
Alireza