Swapped out 4300-48p with a 4300-48MP yesterday .. Im getting this a log about ever 10 minutes or so..
My google fu is not helping me understand what and why im getting this message. ? Im going to swap out the SFP Monday with a Juniper SFP just to see if that fixes the issue.. We never seen this log before when we ran the ex4300-48P.. Heck maybe its the new mondule for the 4300-MP..
Anyways here is my log if anyone can tell me about this warning..
Jan 12 10:20:51 rni2 fpc1 sfp-1/2/2 link 2 SFP voltage high warning cleared
Jan 12 10:20:57 rni2 fpc1 sfp-1/2/2 link 2 SFP voltage high warning set
snip show chassis hardware
PIC 2 REV 05 650-080740 XS0218490032 4x10G SFP+
Xcvr 2 NON-JNPR SPC191000MG SFP+-10G-LR
show interfaces diagnostics optics xe-1/2/2
Physical interface: xe-1/2/2
Laser bias current : 30.838 mA
Laser output power : 0.5870 mW / -2.31 dBm
Module temperature : 27 degrees C / 80 degrees F
Module voltage : 3.4650 V
Laser receiver power : 0.1870 mW / -7.28 dBm
Laser bias current high alarm : Off
Laser bias current low alarm : Off
Laser bias current high warning : Off
Laser bias current low warning : Off
Laser output power high alarm : Off
Laser output power low alarm : Off
Laser output power high warning : Off
Laser output power low warning : Off
Module temperature high alarm : Off
Module temperature low alarm : Off
Module temperature high warning : Off
Module temperature low warning : Off
Module voltage high alarm : Off
Module voltage low alarm : Off
Module voltage high warning : On
Module voltage low warning : Off
Laser rx power high alarm : Off
Laser rx power low alarm : Off
Laser rx power high warning : Off
Laser rx power low warning : Off
Laser bias current high alarm threshold : 80.000 mA
Laser bias current low alarm threshold : 12.000 mA
Laser bias current high warning threshold : 75.000 mA
Laser bias current low warning threshold : 15.000 mA
Laser output power high alarm threshold : 2.2380 mW / 3.50 dBm
Laser output power low alarm threshold : 0.0600 mW / -12.22 dBm
Laser output power high warning threshold : 1.1220 mW / 0.50 dBm
Laser output power low warning threshold : 0.1510 mW / -8.21 dBm
Module temperature high alarm threshold : 75 degrees C / 167 degrees F
Module temperature low alarm threshold : -5 degrees C / 23 degrees F
Module temperature high warning threshold : 70 degrees C / 158 degrees F
Module temperature low warning threshold : 0 degrees C / 32 degrees F
Module voltage high alarm threshold : 3.630 V
Module voltage low alarm threshold : 2.970 V
Module voltage high warning threshold : 3.465 V
Module voltage low warning threshold : 3.135 V
Laser rx power high alarm threshold : 2.2387 mW / 3.50 dBm
Laser rx power low alarm threshold : 0.0145 mW / -18.39 dBm
Laser rx power high warning threshold : 1.1220 mW / 0.50 dBm
Laser rx power low warning threshold : 0.0363 mW / -14.40 dBm