SRX Next-Gen Firewalls

 View Only
last person joined: 3 days ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

Welcome!

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Juniper Threat LabsSRX Upgrade Guide Security Advisories Technical Bulletins

Latest Discussion Posts

  • Profile Picture

    Using a Public CA Cert for SSL Forward Proxy

    By: RoutingFrames , an hour ago

    Hi all, Is it possible to use a public CA cert as my Root-CA in ssl proxy configuration so I do not have to add self-signed certs to all computers downstream of the SRX?

  • Profile Picture

    RE: SRX "sync-icmp-session"

    By: vidar.stokke , 16 hours ago

    No. Not similar. We do eBGP towards our ISP. ------------------------------ Best regards Vidar Stokke ------------------------------

  • Profile Picture

    RE: Disappearing global address-set

    By: Nikolay Semov , 3 days ago

    I believe the answer is "Yes," perhaps even "YES!!!" ------------------------------ Nikolay Semov ------------------------------

  • Profile Picture

    Disappearing global address-set

    By: RADEK BADURA , 4 days ago

    When I insert a new address-set into the global address book on the SRX340 device with version 24.2R1 through J-Web, it disappears after the commit command and is not visible in the J-Web interface. However, it is created and visible in the CLI interface. ...

  • Profile Picture

    RE: SRX345 1000Base-LX Optic compatibility to Cisco ...

    By: EMTSU-IT , 4 days ago

    Hey @ChrisLee . Thanks for getting back to me with an update. It's a very odd thing, because it's the same on the Cisco side, try a different piece of kit, and the link comes up, but put the 9200L back into the mix, and the problem comes back, maybe ...

  • Profile Picture

    RE: SRX345 1000Base-LX Optic compatibility to Cisco ...

    By: ChrisLee , 4 days ago

    Hi @EMTSU-IT Sorry to say I ended up giving up on this and have closed off my JTAC case as well. I was unable to get traction from the customer to participate in the troubleshooting by running any commands/settings that JTAC were requesting anyway ...

  • Profile Picture

    RE: SRX345 1000Base-LX Optic compatibility to Cisco ...

    By: EMTSU-IT , 4 days ago

    @ChrisLee : how are you getting on with this issue? I'm still having intermittent issues with it.

Announcements

  • Introducing Juniper Support Portal (JSP) Mobile App for iOS

    The Juniper Support Portal (JSP) Mobile App is now available for customer use on iOS platforms. The app is designed to provide mobile access for on-the-go service support. 

    What’s available?

    • Live Chat Support
    • Instant Notifications
    • Knowledge Base Access 

Unanswered Posts

  • Using a Public CA Cert for SSL Forward Proxy

  • Juniper Secure Connect with Windows built-in VPN c ...

  • MSCHAPv2 instead of PAP in phase 1 RADIUS authenti ...

  • SRX & EVPN VPWS faisability

  • Log format for Juniper SRX Series IDP

  • HTTPS/TLS traffic inspection on SRX1500 configured ...

  • Proxy chain capability of SRX1500s configued in cluster ...

Top Contributors in the Community