SRX Next-Gen Firewalls

I believe the answer is "Yes," perhaps even "YES!!!" ------------------------------ Nikolay Semov ------------------------------

When I insert a new address-set into the global address book on the SRX340 device with version 24.2R1 through J-Web, it disappears after the commit command and is not visible in the J-Web interface. However, it is created and visible in the CLI interface. ...

Hey @ChrisLee . Thanks for getting back to me with an update. It's a very odd thing, because it's the same on the Cisco side, try a different piece of kit, and the link comes up, but put the 9200L back into the mix, and the problem comes back, maybe ...

Hi @EMTSU-IT Sorry to say I ended up giving up on this and have closed off my JTAC case as well. I was unable to get traction from the customer to participate in the troubleshooting by running any commands/settings that JTAC were requesting anyway ...

@ChrisLee : how are you getting on with this issue? I'm still having intermittent issues with it.

First, your proxy IDs overlap, I'm not sure that's OK: Local Identity: ipv4_subnet(any:0,[0..7]=10.70.5.0/24) Local Identity: ipv4_subnet(any:0,[0..7]=0.0.0.0/0) If you already have 0/0 as one ID, why keep 10.70.5.0/24? The problem reported ...

Hi Francis, Yes, I've used it like this in my system. It was explained this way in the Juniper guide (YouTube I think).