SRX Next-Gen Firewalls

 View Only
last person joined: 20 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

Welcome!

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Ask AI Juniper Threat Labs SRX Upgrade Guide Security Advisories

Latest Discussion Posts

  • Profile Picture

    RE: SRX550, 10g how?

    I did come up with an answer for 10g, I'm going to make sure, or at least try to get the srx550 on its 10g module working. I accomplished 10g DAC first. Now comes fibre, but I'm sorry I should have tried fibre first. I now think I know the answer however. ...

  • Yes, you already figured out the solution there at the end. ------------------------------ Nikolay Semov ------------------------------

  • @eugene1973 firewall-install-disable is for BGP FlowSpec, and the configuration in question does not use BGP. The WAN interface has a static IP address, no DHCP client enabled, so no-dns-install is not applicable, but ... since you mentioned it ... ...

  • Hi All, So I have asked support this and not gotten a clear answer. If I bring Cloud ATP and SecIntel into play, how would you mange the rules order. Here is an example. Lets say you want to have a rule that only permits http and https. The ...

  • Profile Picture

    RE: using pyez

    Ha! that is perfect thanks again! I will take your advice on using json/xml and finish this off ------------------------------ ROB MERRITT ------------------------------

  • Profile Picture

    RE: using pyez

    From the CLI you can find out what the RPC is by typing the command + " | display xml rpc". e.g. show security nat resource-usage source-pool gos_src_pool_198_169_34_12 | display xml rpc Which returns the result: <rpc> <retrieve-source-nat-pool-resource-usage> ...

    1 person recommends this.
  • Profile Picture

    RE: using pyez

    sure Ill post the full script but is there a command to do this to show just a pool? cmd_to_execute = "show security nat resource-usage source-pool " + pool nodebkup@regn06-cn-gosfw-1> show security nat resource-usage source-pool ...

Announcements

  • Introducing Juniper Support Portal (JSP) Mobile App for iOS

    The Juniper Support Portal (JSP) Mobile App is now available for customer use on iOS platforms. The app is designed to provide mobile access for on-the-go service support. 

    What’s available?

    • Live Chat Support
    • Instant Notifications
    • Knowledge Base Access 

Unanswered Posts

Top Contributors in the Community