SRX Next-Gen Firewalls

Try to do the workaround before rebooting " restart web-management " that works for my setup ------------------------------ CHRISTOPHER TUSKA ------------------------------

Check DHCP client status on reth2.201 while seeing the "192.168.1.254 192.168.1.1 ICMP 74 Destination unreachable (Port unreachable)" messages. Also whether a default route is installed. My suspicion lies in the negotiation between the SRX and Lumen. ...

Can confirm same issues on 24.2R1.17. Have two SRX's deployed in the field. Rebooting the router usually solves the issue where it randomly seems to have issues. ------------------------------ ANDREW SHOWERS ------------------------------

(disclaimer: homelab) Hey guys, I am having an issue with the interaction between the SRX320 and the Cisco WLC 3504. Wireless clients that have their gateway set and traffic handled on/by the SRX320, have their traffic either dropped or not forwarded ...

correct DNS is now supported in the latest code versions, however, it only works for ipv4 only ; if you need ipv6 ( I'm using ipv6 ike with dynamic "hostname" vpn to avoid opening the VPN hub to the world as I can lock down the VPN DNS name) so ...

I'm with Steve on this one. It's nice to issue a single command and just sit back and let it do its thing, upgrading a whole stack. It seems that the validation whether a cluster can perform the operation are insufficient, so if your cluster isn't in ...

ISSU has been a mixed experience for me from the beginning in 2009. When it works the process is great but the failures tend to be much worse than scheduled outages. A few years back we made the decision to do scheduled outages with reboots instead ...