View Only
last person joined: 6 days ago 

Ask questions and share experiences with SD-WAN and Session Smart Router (formerly 128T).

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! 

Need additional guidance?  Check out these Juniper Resources.

Documentation128T User GuideThe Feed

Latest Discussion Posts

  • Happy Friday everyone! I hope your Summer has been fun and relaxing. I hope you had a chance to recover, get some of your projects done, and spend some time with the family. Maybe you got a little travel in if you are into that. I know I ...

    2 people recommend this.
  • This is perfect, thank you! One last question: I have a topology listed below: Could the SSR serve as a transit device? Imagine constructing a layer 2 service from SRX A to SRX B. Instead of a conventional VPLS setup, the links would be point-to-point ...

  • Hi Jacob, These instructions on how to configure EoSVR from the GUI may help to fill in any potential gaps: Ensure that you configure the EoSVR bridge on both peer routers that will be sending EoSVR traffic to one another. Configure ...

    1 person recommends this.
  • I hope you're all doing well. I'm currently working on setting up an Ethernet over Secure Vector Routing (EoSVR) bridge between two Juniper SSRs, and I've hit a bit of a snag. I have two SSR connected to each other via a /30 link. Connected to each ...

  • This message was posted by a user wishing to remain anonymous Hello, I exported IPFix data from a Juniper SSR router to a Broadcom NFA . The NFA is supposed to support IPFIX if it complies with the standards for NetFlow v9. This link shows ...

  • Hi Dustin Thank you for the above information this has helped to get the SSRs in EVE and onto mist. I seem to be issues forwarding packets from the SSRs, not seeing any resolution in the MAC tables and ARP tables when trying to connect a lan port ...

  • Hi Dustin, Many thanks for your respond and great documents that you shared. Best regards Mehdi ------------------------------ MEHDI FARHADI ------------------------------


Unanswered Posts

  • 1 person recommends this.

Top Contributors in the Community