SRX Next-Gen Firewalls

 View Only
last person joined: 20 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

Welcome!

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Ask AI Juniper Threat Labs SRX Upgrade Guide Security Advisories

Latest Discussion Posts

  • Profile Picture

    RE: SRX as DHCP Server with multiple pools but just ...

    By: eugene1973 , 6 hours ago

    Good luck. Maybe helped!!! ------------------------------ Adrian Aguinaga B.S.C.M. I.T.T. Tech (Construction Management) A.A.S. I.T.T. Tech (Drafting & Design) ------------------------------

  • Profile Picture

    RE: SRX as DHCP Server with multiple pools but just ...

    By: kronicklez , 7 hours ago

    Hi, First, i'm not use lo0 on SRX and secondly i'm not have other interface. My setup was the SRX function as DHCP server like normal windows server. Means just one physical / ip address only . Thanks

  • Profile Picture

    RE: SRX as DHCP Server with multiple pools but just ...

    By: eugene1973 , 10 hours ago

    dhcp-local-server } } group lo { interface lo0.0; } group default-group { interface ge-0/0/0.0; } group jweb-default-group { ...

  • Profile Picture

    RE: SRX as DHCP Server with multiple pools but just ...

    By: kronicklez , 21 hours ago

    Hi, I'm try your method but it's not work. The second subnet cannot get dhcp. Thanks

  • Profile Picture

    RE: SRX as DHCP Server with multiple pools but just ...

    By: eugene1973 , 22 hours ago

    The router statement takes multiple ip addresses. } router { 192.168.1.1; 192.168.1.40; } If you use your main ip address, which should ...

  • Profile Picture

    RE: SRX as DHCP Server with multiple pools but just ...

    By: kronicklez , yesterday

    Hi, Your config cannot be use for IPv4 because in each pool need define dhcp-attribute for each specific gateway. Thanks

  • Profile Picture

    RE: SRX as DHCP Server with multiple pools but just ...

    By: eugene1973 , 2 days ago

    I have done this with ipv6, but I have not put the other segment on a vlan as of yet. It does work. pool pool1 { family inet6 { prefix 2601:xxxx:xxxx:xxxx::40/56; range r1 { ...

Announcements

  • Introducing Juniper Support Portal (JSP) Mobile App for iOS

    The Juniper Support Portal (JSP) Mobile App is now available for customer use on iOS platforms. The app is designed to provide mobile access for on-the-go service support. 

    What’s available?

    • Live Chat Support
    • Instant Notifications
    • Knowledge Base Access 

Unanswered Posts

  • SCEP certificate re-enrollent without

  • What is aamwd MSGPACK log?

  • Two VPN S2S redundancy configuration with traffic ...

  • Traffic log contains excessive entries for static nat ...

  • Internal authentication problem

  • IoT Device Security: Risks & Mitigation Strategies ...

  • IoT Device Security: Risks & Mitigation Strategies ...

Top Contributors in the Community