SRX Next-Gen Firewalls

 View Only
last person joined: 8 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

Welcome!

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Juniper Threat LabsSRX Upgrade Guide Security Advisories Technical Bulletins

Latest Discussion Posts

  • Hi, I've looked into this, and can see that the SRX5600X-BASE is EOL but is still in support until 2027. The replacement is the BASE2, but checking I can't see anything to do with an EOL for this. ------------------------------ Ethan Jackson ...

  • Hi, I'm migrating from an SRX240 running 12.3 to an SRX1500 and am having an issue where my trunk definition is no longer valid. The current definition is ge-0/0/15 { unit 0 { family ethernet-switching { port-mode trunk; ...

  • I have an issue with authenticaton and it is not remote. I don't think it is remote, is my opinion. I cannot get the mini password manager dialogs to work on my mobiles(phone). This specific symptom is with my isp provided ...

  • Using JUNOS 24.2R1.17 for the lab and testing ran into the same issue ------------------------------ CHRISTOPHER TUSKA ------------------------------

  • I just want to clarify something first -- you're not really adding ports to an IRB the same way you do with RETH. Think of a defined VLAN like a little switch. In the case of chassis cluster, two little switches. An IRB logical interface is just an ...

  • This message was posted by a user wishing to remain anonymous Thank you, Nikolay. I read many article, but I have some questions that are not clear for me. First - I want to use global-mode switching, but in this mode can I set irb interfaces for ...

  • Soooo, it was something incredibly simple. I had this. set interface ge-0/0/1 unit 0 family inet filter input example The command is set interfaces, not set interface. When i tab through CLI, it filled it in correctly. When I put the ...

Announcements

  • Introducing Juniper Support Portal (JSP) Mobile App for iOS

    The Juniper Support Portal (JSP) Mobile App is now available for customer use on iOS platforms. The app is designed to provide mobile access for on-the-go service support. 

    What’s available?

    • Live Chat Support
    • Instant Notifications
    • Knowledge Base Access 

Unanswered Posts

  • 1 person recommends this.

Top Contributors in the Community