SRX Next-Gen Firewalls

Hi Nikolay, Thank you for the assistance. After the IP of name-server is added, the PC is able to access internet. However, I would like to confirm what do you mean for You can verify this by examining the active IP configuration on the endpoint? ...

Hi all. This question is regarding Multinode High Availability (MNHA) setup of two Juniper SRX nodes in a hybrid deployment: It seems that you always need to have 3 IP addresses for each VLAN; one unique for each node and one virtual IP. For ...

Have you tried resetting to factory, then connecting via the console port, then in the cli switch to root access commands. There is a document which covers this on the web. I know it's still there and it's for srx300. I'd look for it but I forgot the ...

Your internal client machine at 10.10.10.2 is not getting any DNS server information. You can verify this by examining the active IP configuration on the endpoint. Because ge-0/0/0.0 has a static IP address, it has no settings it can propagate downstream ...

Hi Nikolay, The below information is my configuration and the information which you require. Thanks for the assistance. ## Last changed: 2024-05-10 10:40:32 UTC version 20200609.165031.6_builder.r1115480; system { host-name 300; root-authentication ...

I suspect you'll have to zeroize the system. ------------------------------ Nikolay Semov ------------------------------

Looks like you have a master password configured on the device. Check this out: https://www.juniper.net/documentation/us/en/software/junos/user-access/topics/topic-map/master-password-configuration-encryption.html#id-hardening-shared-secrets-in-junos-os ...