Join Elevate
If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!
Need additional guidance? Check out these Juniper Resources.
Ask AI Juniper Threat Labs SRX Upgrade Guide Security Advisories
The feature you're looking for was introduced in 22.2R1 and is described here: https://www.juniper.net/documentation/us/en/software/junos/release-notes/22.2/junos-release-notes-22.2r1/topics/new-features/feature-descriptions/vpns-10.html I can't confirm ...
Hi Raxit, traffic selectors are indeed supported in route-based VPNs. It's hard to say what you are missing without having your configuration. Please refer to this article or post the config you are using: https://www.juniper.net/documentation/us/en/software/junos/vpn-ipsec/topics/topic-map/security-traffic-selectors-in-route-based-vpns.html ...
Dear Experts I upgraded SRX 1500 from 21.1 R3.11 to 23.4R2.13 but the main feature that i was looking for IPSEC VPN traffic selector Preference configuration, which is still not able to configure. Can you plz guide me if i am missing something? https://www.juniper.net/documentation/us/en/software/junos/cli-reference/topics/ref/statement/traffic-selector-edit-security.html ...
Reviving post! ------------------------------ Adrian Aguinaga B.S.C.M. I.T.T. Tech (Construction Management) A.A.S. I.T.T. Tech (Drafting & Design) ------------------------------
My thoughts about protocol are this. My multilink trunks run and are at 8 links. That is maximum. MLT by Nortel may not exist in any newer versions with them but Cisco might. 802.3ad is covered here. It was way scary to get working. I suggest 10g minimum. ...
I'm sorry if my statement seems untrue. I would agree normally. I have to at least try to get lacp on the srx. So, for that im sorry. My Asus ap's and media bridge have the lacp, but I need to see about how those work. I know its running on them. They ...
If you use the NFX as a virtual SRX platform, reth interfaces should be the way to go. Connecting the underlying ge interfaces to separate heth interfaces (the physical ones in the NFX box) would give you proper redundancy. Also, a reth with multiple ...
Either the content you're seeking doesn't exist or it requires proper authentication before viewing.