SRX Next-Gen Firewalls

 View Only
last person joined: yesterday 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.


If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Juniper Threat LabsSRX Upgrade Guide Security Advisories Technical Bulletins

Latest Discussion Posts

  • Hi all, I have a SRX300 which followed the instruction of an official document to configure which websites are allowed or not allowed to be accessed but the configuration does not work after I completed the configuration. The official document is ...

  • Yes, part of doing the configuration will add a forwarding instance. You can see an example configuration here. ...

  • Hello , I am having a requirement from client , they have SRX cluster with a custom routing instanace (Virtual router) called Prod.inet.0 All LAN interfaces ( vlan 5, vlan6,vlan 7)and WAN interface ( ISP1) are in this custom routing instance ...

  • Thank you for your help, It's resolved after reinstalling the system. ------------------------------ EL hatmi Khalid ------------------------------

  • Andy, it's CLI that's generating the "invalid user" error. Samar, maybe something got corrupted during the initial boot up and set up of the virtual machine. Try resetting it from the original file you downloaded. Alternatively, maybe something is corrupted ...

  • You should open a case with Juniper TAC if you have an active support contract. ------------------------------ Nikolay Semov ------------------------------

  • Not really my area of expertise, but it seems as though the prompt is still in the SHELL, rather than the CLI, since I would never expect CLI (mgd) to display "/bin/sh: configure: not found". If you type "cli" does that take you into the CLI? From ...

Unanswered Posts

Top Contributors in the Community