SRX Next-Gen Firewalls

Hello, I am new to JunOS so please bear with me. I have an environment where I have several different /24s leaving a single port on an ESXi host and connecting to a single interface on my SRX345. I added the IP's for the gates as xxx.xxx.xxx.1/24 and ...

Hi Everyone, I solve it by my self. The commands are changed as below set firewall family inet filter webFilter term 1 from source-address 172.16.1.12/32 set firewall family inet filter webFilter term 1 from destination-port http set firewall family ...

Hey folks, Running JUNOS 11.4R12, I'm attempting to use a 4GB CompactFlash card in an SRX650, while I recognise the documentation indicates a 2GB should be used, they are proving hard to source locally where I am. Following along the document here ...

Hi Pohui, did you tried include a new term? i mean: #Rename the term 2 to "term 100" rename firewall family inet filter webFilter term 100 to term 1 #create term 2 entry set firewall family inet filter webFilter term 2 from protocol icmp set firewall ...

Hi All, I would like to configure a FBF to specify a return traffic next hop in order to avoid the an asynmetric routing. The return packet from the serveur when reach the srx takes a different route (interface) instead of the interface that the ...

I'm relatively new in SRX. I have a next one problem: We have a SRX1500 in cluster and work for our network. We want to add the traffic from other clinet to our SRX1500 and to divide from our. I rewrote the configuration of the other SRX in the ours ...

Good day, Today i am at the customers location. We have made the ipsec from Teltonika to SRX. as traffic selectors i added 192.168.20.0/24 > 192.168.10.0/24 192.168.20.0/24 > 192.168.0.0/24 I am able to ping devices in the head office location ...