SRX Next-Gen Firewalls

When various 3rd party threat feeds are selected, they are curated to include a threat level. So all of these feeds are included by default under the CC category on the SRX. The action is based on the CC profile that's created within Secintel configuration. ...

If they are, I don't know why they bought back the PulseSecure client (I thought I read somewhere) and have added a specific setup wizard (which didn't work for me) in the latest version of JunOS. Also, I found a video from a year ago specifically outlining ...

Sorry to chime in late -- but I have several SRX series firewalls VPN tunneling back to my SSG140 (running 6.3.something) It works fine as long as you get all the parameters the same. I'm doing both static IPs at both ends and my SSG set to accept ...

Thanks, Steve, for your reply. I did get this to work by playing with the proposals. I appreciate your feedback. Paul ------------------------------ Paul Andreozzi ------------------------------

For troubleshooting vpn issues like this you would need to go through the tests and error messages in order. You start with confirming phase 1 and moving up to phase 2. Usually the responding side of the vpn as opposed to the initiating side will have ...

Hi All, I know most of this audience is full of very smart people. I am looking for any information on creating an IPSec VPN from a SRX running version 22.2R1.9 with a Juniper SSG5 running version 6.2.0.1. I am not sure if these are incompatible ...

Okay, thanks. Because I've had it activated for a good week and I haven't seen any special upturns since the boxes were activated. On the J-Web part, SecIntel sends back blocking information with the info "cc_ip_data", will it be the same with the activation ...