SRX Next-Gen Firewalls

Thank you so much for you help here is the result after committing the steps above run show services security-metadata-streaming dns statistics Logical system: root-logical-system DNS session statistics: Cache Hits: ...

Hi guys, I have setup the VLAN on my juniper SRX 300 and uplink to my switch. I am able to do an access mode to each of the port but once i want to change to a different VLAN my laptop/pc will be using the previous VLAN instead. For example my first ...

You would use the irb interfaces as the gateway address for the two vlans to insure that all traffic between the vlans does transit the SRX. These interfaces, not the layer 2 interfaces are what you would assign to the security zones. Then you would ...

Hi John, These are the steps to enable DNS Security on the SRX. Enroll device to ATP cloud, ensure that device has premium license for ATP cloud. https://www.juniper.net/documentation/us/en/software/sky-atp/atp-cloud-admin-guide/topics/task/sky-atp-device-enrolling-srx-only.html ...

This message was posted by a user wishing to remain anonymous Dear Team, I have a SRX300 (no configuration) and I need to limit access the resources from VLAN 1 to VLAN 2 . I need to assign a Native VLAN on each SRX ports for each VLANs (two ports ...

While it is possible (I did this once to just try it years ago) to connect SRX cluster nodes to each other via switches. It is really not recommended. You need to make the control and fabric links their own VLAN's. Turn off LLDP/CDP/NDP or anything ...

This message was posted by a user wishing to remain anonymous Remote accessVPN with SecureConnect is working well for both mobile & desktops on SRX380 with JUNOS 21.4-R3 version. However, it's not allowing simultaneous login for the same user using ...