View Only
last person joined: 6 days ago 

Ask questions and share experiences with Junos Space and network management.

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge! Post here or in the following Security Management community.

Need additional guidance?  Check out these Juniper Resources.

Documentation Knowledge BaseThe Feed

Latest Discussion Posts

  • I am having the same issue. Was there ever a resolution to the J-web not showing PoE information? ------------------------------ SEAN SUTTERFIELD ------------------------------

  • I'm using EX and QFX switch with Junos ver 20.4R3. How i configure these switch to sent log to external syslog server when CPU or Memory reach 80 %. ------------------------------ Danma Son ------------------------------

  • Profile Picture

    RE: Junos Space and Domains

    Q : I want to give a certain Group of Users access to every Device on Space but have their own Objects (scripts, configlets, etc). A: Not possible in Space to give access to ONLY to their own Objects (scripts, configlets, etc). Using the domain, ...

    1 person recommends this.
  • It works! You saved my day! Thank you! ------------------------------ ANDREA BERTUCCI ------------------------------

  • Please delete below and run discovery again.. delete system services netconf rfc-compliant delete system services netconf yang-compliant This is not supported by Space. ------------------------------ Pravin Lokhande ------------------- ...

    1 person recommends this.
  • The service snmp isn't listed in the options. But the discovery of the device works fine: But at the end of the discovery i get from Junos space the following message: "Device failed to return the system information" ------------------------------ ...

  • admin@SOPRA> show configuration system services ssh { root-login allow; protocol-version v2; port 22; } ftp; telnet { connection-limit 10; rate-limit 4; } netconf { ssh; rfc-compliant; ...

Unanswered Posts

Top Contributors in the Community