Switching

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.

If you have a question or a use case, there are likely others experiencing or who worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Ask AI Documentation Knowledge Base Day One Books Free Trial

Latest Discussion Posts

  • Profile Picture

    "WARNING: loader version: 1.2 should be >= 2.0" on ...

    By: STEPHEN MCBRIDE , 2 hours ago

    When I check the "Junos Software Versions - Suggested Releases to Consider and Evaluate" webpage on Juniper's website, for EX2300 and EX2300-C switches, it recommends "Latest Junos 23.4R2-Sx" which at present is 23.4R2-S4.11 from the downloads page. However ...

  • Profile Picture

    EX4000 stencils

    By: MARK JOHNS , yesterday

    Can we please get EX4000 stencils? ------------------------------ MARK JOHNS ------------------------------

  • Profile Picture

    RE: All interfaces shut down for no reason, including ...

    By: RandyS , 2 days ago

    I just looked at our old support ticket. Our FPC cratered and the fix was to upgrade the Intel Bios... This issue is being tracked by PR1675832 Fix for the Intel@ TSX issue is available with updated BIOS Suggested BIOS with fix: QFX5120-32C ...

  • Profile Picture

    RE: All interfaces shut down for no reason, including ...

    By: Olivier Benghozi , 2 days ago

    However there are no firmwares/bios on Juniper download pages for QFX5100 / EX4600. I would first upgrade the JunOS, I think. ------------------------------ Olivier BenghoziOlivier Benghozi ------------------------------

  • Profile Picture

    RE: All interfaces shut down for no reason, including ...

    By: RandyS , 2 days ago

    We have had something similar (all ports shut down EXCEPT mgmt and console,) but we were running a newer version. The fix was updating BIOS on the switch itself. This is the document we used for the QFX5120-32C. https://www.juniper.net/documentation/us/en/software/junos/junos-install-upgrade/topics/topic-map/ex4400-cpld-bios-cpu-upgrade.html ...

  • Profile Picture

    RE: Question on MAC-VRF

    By: Andrei Cebotareanu , 2 days ago

    Hi, Can you please advise on hardware and software in charge? I tested the same on ACX7024 and PTX10001-36MR - and your config is commited without any issues. I also found the follwing interesting link (was not aware about this - so thanks to your q. ...

  • Profile Picture

    RE: All interfaces shut down for no reason, including ...

    By: HarryC , 2 days ago

    Hi, 16.1 is such an old version, I would recommend upgrading to the current recommended version of 21.4R3-S10 ------------------------------ HARRY ------------------------------

Announcements

  • Tell us if you've upgraded or if you need help upgrading

    Complete this three-question survey to help us identify where you are in your upgrade journey.

Unanswered Posts

  • "WARNING: loader version: 1.2 should be >= 2.0" on ...

  • EX4000 stencils

  • access interfaces flapping in EVPN-VXLAN collapsed ...

  • QFX5200 Monitoring of OSPF3/OSPF states

  • Native VLAN, how to recognize if the End-Customer is ...

  • Mist Marvis "Negotiation Incomplete" seems inaccu ...

  • QFX10002 sflow not working from mgmt

Top Contributors in the Community