Switching

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.

If you have a question or a use case, there are likely others experiencing or who worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Documentation Knowledge Base Day One Books Free Trial

Latest Discussion Posts

  • Yes, well, actually « The default factory configuration on legacy EX Series switches enables IGMP snooping by default on all VLANs.» That means that on EX2200, IGMP snooping is by default on all vlans, BUT since no IGMP querier is configured, multicast ...

  • Hi Robert, Multicast flows are not enabled freely by default on Enterprise Switches. Here is a configuration to allow dlna (UPnP AV Spec,). This works for Chromecast to! Also, I believe ff0x::c (where x is the scope ID) is the IPv6 address. ...

  • Hi, request commands are not configuration commands. This can't be seen in the show configuration output. Mist will not override the effect of these request commands performed from CLI/shell. Adding these commands on the additional CLI area would ...

    1 person recommends this.
  • I am new to Juniper switching. Purchased a EX2200-24P-4G. I know it is EOL, but I have to start somewhere. I powered it up and it sees my network. I can look at the directory with my media files. When I start a client, the dlna servers do not appear. ...

  • Hello, I have tried to find a complete answer to this. Most of the documentation relates to the CLI. I am attempting to bring up my EX4400-24x's (2) in a Virtual Chassis. Reading the information about this particular model, it appears that I need to ...

  • finally I configure ex3400 with cli commands successfully ... ======================================================= % cli root> configure root# delete chassis auto-image-upgrade root# set system root-authentication plain-text-password root# set ...

    1 person recommends this.
  • The list indicates the entire Junos 20 line was released with the fix included for this PR. ------------------------------ Steve Puluka BSEET - Juniper Ambassador IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired) http://puluka.com/home ...

Announcements

Unanswered Posts

Top Contributors in the Community