Switching

Thanks for the advice, unfortunately there is nothing displaying on the console at power up. So it is not possible to interruptthebootloader because the machine doesn't seem to be able to get past P.O.S.T. ------------------------------ BRIAN LONGWE ...

Another option would be to create a bootable USB from install media. Then you need console access to interrupt the boot cycle at the loader screen and do the format install from this prompt. The details are here. https://supportportal.juniper.net/s/article/EX4400-Format-Install-Procedure?language=en_US ...

Hi, Have tried this but the device is not getting to the point where it chooses to boot from usb. Fans keep spinning up then down continuously. Any thoughts? ------------------------------ BRIAN LONGWE ------------------------------

That makes complete sense. Appreciated!! ------------------------------ Be kind!! ------------------------------

The filter above will deny all traffic to address 172.16.100.2/32. In filters once a match occurs all processing stops. So to allow icmp to 172.16.100.2/32 you would need an accept term just for icmp followed by the reject term above. ------------------------------ ...

Hi, Can you please share the filter configuration with the term to accept icmp? Regards ------------------------------ Sheetanshu Shekhar ------------------------------

Good morning, Let me help to answer your questions, 1) set system radius-server 1.1.1.1 secret test ( This one is to use Radius for authentication towards access (system authentication)of the devices itself) so instead of using a local "username" ...