I have the following topology
I have MSDP connection between RP1 and RP3. I expected to ping from S-2 to R-1. Can I do that ?
S-2#ping 18.104.22.168 (22.214.171.124 is registered from R-1)Type escape sequence to abort.Sending 1, 100-byte ICMP Echos to 126.96.36.199, timeout is 2 seconds:
root@RP3# run show msdpPeer address Local address State Last up/down Peer-Group SA Count188.8.131.52 184.108.40.206 Established 03:21:25 Anycast 0/0
root@RP3# run show route table inet.4
inet.4: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)+ = Active Route, - = Last Active, * = Both
220.127.116.11,10.100.112.22/64*[MSDP/175/2] 00:00:36, from 18.104.22.168Local
10.100.112.22 is configured on S-2.
Any insights ? what have I missed ?
thanks a lot !!
You missed the multicast TTL, default is 1.
ping 22.214.171.124 ttl 20
TTL is 255
ge-0/0/2 on both RPs should be configured to be pim sparse mode ?
inter domain RPs need to be pim neighborship ?