Routing

 View Only
last person joined: 2 days ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.
  • 1.  Nat configuration to single interface for particular ips

    Posted 08-14-2018 08:04

    Hi Guys,

    I am new to Juniper router. I need to configure Nat in my new juniper MX480 Router. Need to nat ip series 192.168.0.0/16 to 10.162.66.65/32 through a single interface to outside. At the same time there were some users other than 192.168.0.0/16 series go to outside through the same interface without apply nat. Anybody please guide me to configure the same. Thank you


    #NATconfiguration


  • 2.  RE: Nat configuration to single interface for particular ips

     
    Posted 08-14-2018 09:00

    Hello,

     

    The following link has an example with the explanation that might be useful.

     

    https://www.juniper.net/documentation/en_US/junos/topics/example/nat-inline.html

     

    Regards,

     

    Rushi



  • 3.  RE: Nat configuration to single interface for particular ips
    Best Answer

    Posted 08-14-2018 14:48

    Hello,

    There are 2 issues with inline NAT suggestion:

    1/ inline NAT does not support port translation/PAT. The OP requested xlating  192.168.0.0/16 to 10.162.66.65/32, which is impossible without PAT.

    2/ inline NAT requires a license.

    As for the original requirement, You need a MS-MPC services linecard or MS-MIC services interface card to achieve  xlating 192.168.0.0/16 to 10.162.66.65/32 with PAT. Reference

    https://www.juniper.net/documentation/en_US/junos/topics/concept/ms-mic-and-mpc-overview.html

    HTH

    Thx

    Alex

     



  • 4.  RE: Nat configuration to single interface for particular ips

    Posted 08-15-2018 07:05

    Hi,

    Do you have any example configuration for PAT in MX480 could you please share to me.

    Also how can i dentify the ms-mic cards???

     

     

    Thank you



  • 5.  RE: Nat configuration to single interface for particular ips

    Posted 08-15-2018 07:21

    Hi aarseniev,

    Do you have any example configuration for PAT in MX480 could you please share to me. Also how can i dentify the ms-mic cards??



  • 6.  RE: Nat configuration to single interface for particular ips

    Posted 08-15-2018 07:03

    Hi,

     

    I tried the same ,but when trying to commit the below mentioned error was shown.

    'term r1'
    With translation-type basic_nat_44, pool must contain equal or more addresses than the from clause
    error: configuration check-out failed