I need yours achieved for solve my problem. I have this configuration in SRX210
This srx is connected with router cisco via interface E1.
Did you put your interface in any security zone? For example,
set security zones security-zone untrust interfaces e1-1/0/0.0
Assign E1 interface to the zone and put the required policy for the ping and other traffic..
Also check whether you are able to ping your own ip ..
Thanks by help... I can do ping right now...
Thanks so much,
Excuse me, i can do ping since srx to router cisco, but i can't ping from router cisco to srx....
set security zones security-zone untrust host-inbound-traffic system-services ping
Also, for transit traffic, you will need to set up security policies. See, e.g.