Switching

 View Only
last person joined: yesterday 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.
  • 1.  LACP Link protection

    Posted 11-12-2009 04:20

    Hi there,

     

    Is there a way to tell which port is active when using link protection on LACP between a 4200 and 3200? The monitor traffic only shows LACP and uni-directional IP traffic on one port and the other only shows only LACP, so I guess that the second one is the active one but is there a way to verify this?

    Thanks


    #LACP
    #EX


  • 2.  RE: LACP Link protection

    Posted 11-12-2009 04:36

    Hi,

     

    "show lacp interfaces"

    "show interface ae0 detail"

     

    Kind Regards

    Michael Pergament

     

    If this worked for you please flag my post as an "Accepted Solution" so others can benefit. A kudo would be cool if you think I earned it.



  • 3.  RE: LACP Link protection

    Posted 11-12-2009 06:39

    Hi Mike

     

    Thank you. That works on the 4200 but not on the 3200. The 3200 doesn't supply stats for the seperate interfaces so you cannot deduce which one is active.

     

    What I was really wondering was if there was a command which would utilise the flag settings used by the "request interface switchover aex" which will monitors which link is active.

     

    Thanks

     



  • 4.  RE: LACP Link protection

    Posted 11-12-2009 06:42

    Hi,

     

    command is the same for EX4200 and EX3200. If you do not get any output on EX3200 then no LACP is configured on it.

     

    Kind Regards
    Michael Pergament



  • 5.  RE: LACP Link protection

    Posted 11-12-2009 07:26
      |   view attached

    Hi Mike

     

    The output from the 3200 is as follows :

     

    airspeed@Cappagh.sw1> show interfaces ae0 detail
    Physical interface: ae0, Enabled, Physical link is Up
      Interface index: 153, SNMP ifIndex: 132, Generation: 156
      Link-level type: Ethernet, MTU: 2000, Speed: 1000mbps,
      MAC-REWRITE Error: None, Loopback: Disabled, Source filtering: Disabled,
      Flow control: Disabled, Minimum links needed: 1, Minimum bandwidth needed: 0
      Device flags   : Present Running
      Interface flags: SNMP-Traps Internal: 0x0
      Current address: 00:1f:12:33:34:00, Hardware address: 00:1f:12:33:34:00
      Last flapped   : 2008-12-20 03:09:00 UTC (02:13:33 ago)
      Statistics last cleared: 2008-12-20 01:11:34 UTC (04:10:59 ago)
      Traffic statistics:
       Input  bytes  :             20028207                17088 bps
       Output bytes  :          88288840507             90695720 bps
       Input  packets:               225242                   26 pps
       Output packets:             68008148                 8727 pps
       IPv6 transit statistics:
        Input  bytes  :                   0
        Output bytes  :                   0
        Input  packets:                   0
        Output packets:                   0

      Logical interface ae0.0 (Index 73) (SNMP ifIndex 134) (Generation 138)
        Flags: SNMP-Traps 0x0 Encapsulation: ENET2
        Statistics        Packets        pps         Bytes          bps
        Bundle:
            Input :             0          0             0            0
            Output:             0          0             0            0
        Protocol eth-switch, Generation: 150, Route table: 0
          Flags: Trunk-Mode

    Cappagh.sw1> show lacp interfaces ae0
    Aggregated interface: ae0
        LACP state:       Role   Exp   Def  Dist  Col  Syn  Aggr  Timeout  Activity
          ge-0/1/0       Actor    No    No   Yes  Yes  Yes   Yes     Fast    Active
          ge-0/1/0     Partner    No    No   Yes  Yes  Yes   Yes     Fast   Passive
          ge-0/1/1       Actor    No    No   Yes  Yes  Yes   Yes     Fast    Active
          ge-0/1/1     Partner    No    No   Yes  Yes  Yes   Yes     Fast   Passive
        LACP protocol:        Receive State  Transmit State          Mux State
          ge-0/1/0                  Current   Fast periodic Collecting distributing
          ge-0/1/1                  Current   Fast periodic Collecting distributing

    Cappagh.sw1>

    From the 4200

     

    airspeed@CWT.SW4> show interfaces ae0 detail
    Physical interface: ae0, Enabled, Physical link is Up
      Interface index: 128, SNMP ifIndex: 277, Generation: 131
      Link-level type: Ethernet, MTU: 1514, Speed: 100mbps, BPDU Error: None,
      MAC-REWRITE Error: None, Loopback: Disabled, Source filtering: Disabled,
      Flow control: Disabled, Minimum links needed: 1, Minimum bandwidth needed: 0
      Device flags   : Present Running
      Interface flags: SNMP-Traps Internal: 0x0
      Current address: 00:23:9c:1a:b3:c0, Hardware address: 00:23:9c:1a:b3:c0
      Last flapped   : 2009-09-18 11:00:39 IST (00:02:54 ago)
      Statistics last cleared: 2009-09-18 08:30:45 IST (02:32:48 ago)
      Traffic statistics:
       Input  bytes  :          85471660898                 7840 bps
       Output bytes  :             15936140                 5840 bps
       Input  packets:             64786398                   10 pps
       Output packets:               190196                    7 pps
       IPv6 transit statistics:
        Input  bytes  :                   0
        Output bytes  :                   0
        Input  packets:                   0
        Output packets:                   0

      Logical interface ae0.0 (Index 73) (SNMP ifIndex 279) (Generation 141)
        Flags: SNMP-Traps 0x0 Encapsulation: ENET2
        Statistics        Packets        pps         Bytes          bps
        Bundle:
            Input :             0          0             0            0
            Output:        157920          0      11983850            0
        Link:
          ge-0/1/0.0
            Input :             0          0             0            0
            Output:         20899          0       1622102            0
          ge-2/1/0.0
            Input :             0          0             0            0
            Output:        134753          0      10017078            0
        LACP info:        Role     System             System      Port    Port  Port                                                                             
                                 priority          identifier  priority  number   ke                                                                              y
          ge-0/1/0.0     Actor          0  00:23:9c:1a:b3:c0       127     520     1
          ge-0/1/0.0   Partner        127  00:1f:12:33:34:00       127     520     1
          ge-2/1/0.0     Actor          0  00:23:9c:1a:b3:c0       127     648     1
          ge-2/1/0.0   Partner        127  00:1f:12:33:34:00       127     521     1
        LACP Statistics:       LACP Rx     LACP Tx   Unknown Rx   Illegal Rx
          ge-0/1/0.0              5426        9361            0            0
          ge-2/1/0.0              7636        8493            0            0
        Marker Statistics:   Marker Rx     Resp Tx   Unknown Rx   Illegal Rx
          ge-0/1/0.0                 0           0            0            0
          ge-2/1/0.0                 0           0            0            0
        Protocol eth-switch, Generation: 159, Route table: 0
          Flags: Trunk-Mode

    {master:0}
    CWT.SW4> show lacp interfaces ae0
    Aggregated interface: ae0
        LACP state:       Role   Exp   Def  Dist  Col  Syn  Aggr  Timeout  Activity
          ge-0/1/0       Actor    No    No   Yes  Yes  Yes   Yes     Fast   Passive
          ge-0/1/0     Partner    No    No   Yes  Yes  Yes   Yes     Fast    Active
          ge-2/1/0       Actor    No    No   Yes  Yes  Yes   Yes     Fast   Passive
          ge-2/1/0     Partner    No    No   Yes  Yes  Yes   Yes     Fast    Active
        LACP protocol:        Receive State  Transmit State          Mux State
          ge-0/1/0                  Current   Fast periodic Collecting distributing
          ge-2/1/0                  Current   Fast periodic Collecting distributing

    {master:0}
    CWT.SW4>

    The relevant parts of the config are attached.

     

    It looks like the LACP is working but no output from the command.

     

    The 3200 is running 9.3R2.8 and the 4200 is on 9.6R1.13 (all 3 chassis).

    regards

    Aindriu

    Attachment(s)

    txt
    lacp config test.txt   1 KB 1 version


  • 6.  RE: LACP Link protection
    Best Answer

    Posted 11-12-2009 07:30

    Hi,

     

    just update EX3200 to the same verion as you are using on EX4200 and you will get member statistics as well.

     

    Kind Regards

    Michael Pergament



  • 7.  RE: LACP Link protection

    Posted 11-16-2009 05:18

    Thank you Mike

     

    9.6R1.13 shows the correct stats for the LACP

     

    regards

    Aindriu