Switching

Hi all,

I have a server connected to an EX3400. The server is at 1g/Full-duplex (autonegotiation). However, I am seeing the following errors

  Input errors:
    Errors: 0, Drops: 0, Framing errors: 0, Runts: 0, Policed discards: 0, L3 incompletes: 0, L2 channel errors: 0, L2 mismatch timeouts: 0, FIFO errors: 0, Resource errors: 0
  Output errors:
    Carrier transitions: 6, Errors: 0, Drops: 70542, Collisions: 0, Aged packets: 0, FIFO errors: 0, HS link CRC errors: 0, MTU errors: 0, Resource errors: 0
  Egress queues: 12 supported, 8 in use
  Queue counters:       Queued packets  Transmitted packets      Dropped packets
    0                                0             15712340                70542
    1                                0                    0                    0
    2                                0                    0                    0
    3                                0                    0                    0
    8                                0             31986728                    0
    9                                0                    0                    0
    10                               0                    0                    0
    11                               0                    0                    0
  Queue number:         Mapped forwarding classes
    0                   best-effort
    1                   expedited-forwarding
    2                   assured-forwarding
    3                   network-control
    8                   mcast-be
    9                   mcast-ef
    10                  mcast-af
    11                  mcast-nc

The interface config is pretty simple, nothing fancy

XYZ@123> show configuration interfaces ge-0/0/12
native-vlan-id 50;
unit 0 {
    family ethernet-switching {
        interface-mode trunk;
        vlan {
            members 50-51;
        }
    }
}

The issue I am facing is low download speed. Can someone please help me understand what should I do to fix this Drops?

Thanks

It looks to me like it's dropping traffic only from the BE queue.

Do you have any class of service configured?

Please run:

show configuration class-of-service

Hi Luke, following is the output.

XYZ@123> show configuration class-of-service
host-outbound-traffic {
    forwarding-class network-control;
}