SRX

I was attempt to implement of transparent mode on my vSRX. When I committed, the message show as follow.

[edit]
root@exercise-vSRX-NG1# commit and-quit 
warning: Interfaces are changed from route mode to transparent mode. Please reboot the device or all nodes in the HA cluster!
commit complete
Exiting configuration mode​

Then I followed to reboot my vSRX. But I am still curious about how to know the current state of the interfaces, whether it is on route mode on transparent mode in operational mode cli. What the command are they?

[SRX] Example - Configure Transparent mode on Junos OS 15.1X49 SRX platform - Juniper Networks
Original Message:
Sent: 11-10-2021 01:50
From: Unknown User
Subject: Command to know of routed mode and transparent mode.

I was attempt to implement of transparent mode on my vSRX. When I committed, the message show as follow.

[edit]root@exercise-vSRX-NG1# commit and-quit warning: Interfaces are changed from route mode to transparent mode. Please reboot the device or all nodes in the HA cluster!commit completeExiting configuration mode​

Then I followed to reboot my vSRX. But I am still curious about how to know the current state of the interfaces, whether it is on route mode on transparent mode in operational mode cli. What the command are they?

Thanks for the information. I was meant of thinking of, was my SRX work for layer2 only, or still able to make layer3 interface? Then I follow my study case, and it does work for running both of them simultaneously.  Except of creating the an irb.x interfaces. The output shown the options of which SRX does work on layer2.

Am I correct,  on each of the first time the transparent mode interface applied, it needs to be rebooted?
Original Message:
Sent: 11-10-2021 05:03
From: Ulf Bremer
Subject: Command to know of routed mode and transparent mode.

[SRX] Example - Configure Transparent mode on Junos OS 15.1X49 SRX platform - Juniper Networks
Original Message:
Sent: 11-10-2021 01:50
From: Unknown User
Subject: Command to know of routed mode and transparent mode.

I was attempt to implement of transparent mode on my vSRX. When I committed, the message show as follow.

[edit]root@exercise-vSRX-NG1# commit and-quit warning: Interfaces are changed from route mode to transparent mode. Please reboot the device or all nodes in the HA cluster!commit completeExiting configuration mode​

Then I followed to reboot my vSRX. But I am still curious about how to know the current state of the interfaces, whether it is on route mode on transparent mode in operational mode cli. What the command are they?

root@SRX1500> show ethernet-switching global-information
Global Configuration:

MAC aging interval : 300
MAC learning : Enabled
MAC statistics : Disabled
MAC limit Count : 24575
MAC limit hit : Disabled
MAC packet action drop: Disabled
MAC+IP aging interval : IPv4 - 1200 seconds
IPv6 - 1200 seconds
MAC+IP limit Count : 0
MAC+IP limit reached : No
LE aging time : 1200
LE VLAN aging time : 1200
Global Mode : Transparent bridge
RE state : Master
VXLAN Overlay load bal: Disabled
VXLAN ECMP : Disabled
Fast Update : Disabled

------------------------------
SHIVAJI CHAVAN
------------------------------

Original Message:
Sent: 11-10-2021 01:50
From: Unknown User
Subject: Command to know of routed mode and transparent mode.

I was attempt to implement of transparent mode on my vSRX. When I committed, the message show as follow.

[edit]root@exercise-vSRX-NG1# commit and-quit warning: Interfaces are changed from route mode to transparent mode. Please reboot the device or all nodes in the HA cluster!commit completeExiting configuration mode​

Then I followed to reboot my vSRX. But I am still curious about how to know the current state of the interfaces, whether it is on route mode on transparent mode in operational mode cli. What the command are they?