I don't know but this unit giving me mega headaches..
I don't know what is what am trying all things from internet and nothing is absolutely not done with this thing!
Everything I try I get only errors or blockages or authentication crp things.. not allowing or everything is just bad
I don't know what to do ..
1Cannot upgrade thing running 19.x.x. something .. can't upgrade to junos-srxsme-22.1R1.10.tgz
I don't know what is difference btw first spacebar intercept shows some Octeon srx_340(ram)#
then second space intercept is loader..
why so many crap many modes many sub menus million configurations ... It's just crazy am totally lost with this machine I don't know what to do first
I am in first Octeon srx_340(ram)#
I followed this :
=> setenv ipaddr 10.157.70.170=> setenv netmask 255.255.255.0=> setenv gatewayip 10.157.64.1=> setenv serverip 10.157.60.1=> saveenv
- Reboot the system using the reset command.
- To access the loader prompt, enter use the console connection to connect to the device.
- Reboot the device.
The following message appears:
After this message appears, you see the following prompt:
Hit [Enter] to boot immediately, or space bar for command prompt.
- Press the space bar to access the loader prompt.
The loader> prompt appears. Enter:
loader> install tftp://10.77.25.12/
But I don't know where to connect cable with my PC if in MGMT or link 0/0 confusing
I tried in MNGMT
But address PC in internet protocol must be different
How this works?? if it says ---> install tftp://10.77.25.12/ so in my windows conf protocol setting where I input ip address must be then 10.77.25.13 or same 10.77.25.12?
I tried this process but get message :
loader> install file:///junos-srxsme-22.1R1.10.tgz Target device selected for installation: internal media cannot open package (error 22)
I tried upgrade from USB even that doesn't work
Can someone help ?