Hi Guys,
Got a really simple configuration of two local interfaces ge-0/0/1 and ge-0/0/2. I am trying to get the two interfaces to ping eachother. What am i missing?
set version 20.2R3.9
set system host-name test
set system root-authentication encrypted-password "$6$5Ha2BMVX$EfAUJQR9lis0M3xqN95dqLQ4tR6k8eklxb.1zSMf6MK7JAy.HQ07zQpnrIwB5BVQyoRgzrIpIxlrL.mpK8ODS0"
set system services ssh root-login allow
set system services telnet
set system time-zone Europe/London
set system name-server 8.8.8.8
set system name-server 8.8.4.4
set system max-configurations-on-flash 5
set security policies from-zone lan to-zone guest policy lan2guest match source-address any
set security policies from-zone lan to-zone guest policy lan2guest match destination-address any
set security policies from-zone lan to-zone guest policy lan2guest match application any
set security policies from-zone lan to-zone guest policy lan2guest then permit
set security policies from-zone lan to-zone junos-host policy mgmt match source-address any
set security policies from-zone lan to-zone junos-host policy mgmt match destination-address any
set security policies from-zone lan to-zone junos-host policy mgmt match application junos-ssh
set security policies from-zone lan to-zone junos-host policy mgmt match application junos-http
set security policies from-zone lan to-zone junos-host policy mgmt match application junos-https
set security policies from-zone lan to-zone junos-host policy mgmt match application junos-telnet
set security policies from-zone lan to-zone junos-host policy mgmt match application junos-ping
set security policies from-zone lan to-zone junos-host policy mgmt then permit
set security zones security-zone lan host-inbound-traffic system-services ssh
set security zones security-zone lan host-inbound-traffic system-services ping
set security zones security-zone lan interfaces ge-0/0/1.0 host-inbound-traffic system-services ping
set security zones security-zone guest interfaces ge-0/0/2.0 host-inbound-traffic system-services ping
set interfaces ge-0/0/1 unit 0 family inet address 192.168.1.1/24
set interfaces ge-0/0/2 unit 0 family inet address 192.168.2.1/24
When running the command ping 192.168.2.1 source 192.168.1.1 i receive the following error:
PING 192.168.2.1 (192.168.2.1): 56 data bytes
ping: sendto: Can't assign requested address
I would expect this to work because they are two local interfaces?
Kind Regards,
Ryan
------------------------------
Ryan Todd
------------------------------