Hi guys,
I'm trying to configure our SRX345 cluster to send jflow data to a collector (Scrutinizer). The collector has the IP 10.101.80.20, one of the networks connected directly to the SRX345 cluster, it is the management network. But for some reason, the GWs are not sending any jflow data. This is the config we've put in place:
admin.fw@MANBGFW01> show configuration services
flow-monitoring {
version9 {
template ipv4-test {
ipv4-template;
}
template IPV4-JFLOW-TEMPLATE {
ipv4-template;
}
}
}
admin.fw@MANBGFW01> show configuration interfaces
reth0 {
description VLAN_Office;
redundant-ether-options {
redundancy-group 1;
}
unit 0 {
family inet {
sampling {
input;
}
address x.x.x.x/24 {
}
}
}
}
reth1 {
description VLAN_DEVS-Admins;
redundant-ether-options {
redundancy-group 1;
}
unit 0 {
family inet {
filter {
input SBR;
}
sampling {
input;
}
address x.x.x.x/24;
}
}
}
reth2 {
description VLAN_MGMT;
redundant-ether-options {
redundancy-group 1;
}
unit 0 {
family inet {
filter {
input SBR;
}
sampling {
input;
output;
}
address 10.101.80.254/24;
}
}
}
reth3 {
description VLAN_SSLVPN;
redundant-ether-options {
redundancy-group 1;
}
unit 0 {
family inet {
filter {
input SBR;
}
sampling {
input;
}
address x.x.x.x/23;
}
}
}
reth4 {
description VLAN_WiFI-Dirty;
redundant-ether-options {
redundancy-group 1;
}
unit 0 {
family inet {
filter {
input SBR;
}
sampling {
input;
}
address x.x.x.x/23;
}
}
}
reth5 {
description VLAN_Internet;
redundant-ether-options {
redundancy-group 1;
}
unit 0 {
family inet {
sampling {
input;
output;
}
address x.x.x.x/30;
address y.y.y.y/28 {
primary;
preferred;
}
}
}
}
admin.fw@MANBGFW01> show configuration forwarding-options
sampling {
input {
rate 100;
run-length 0;
}
family inet {
output {
flow-server 10.101.80.20 {
port 2055;
version9 {
template {
IPV4-JFLOW-TEMPLATE;
}
}
}
inline-jflow {
source-address 10.101.80.254;
}
}
}
}
Any idea why it is not working?
Thanks!