Switching

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  QoS setting

    Posted 6 days ago
    hello experts,  unfortunately I'm not familiar with QoS setting. Could you someone help me with the transfer from cisco IOS to Junos?

    class-map match-all USER-TRAFFIC

      match access-group name USER-TRAFFIC-ACL

    !

    policy-map PM-USER-TRAFFIC-RESERVATION

     class USER-TRAFFIC

        bandwidth 500000

     class class-default

     

    ip access-list extended USER-TRAFFIC-ACL

     deny   ip 172.16.1.0 0.0.0.255 any # komentar subnet 172.16.1.0/24 pro datova spojeni (VLAN 20), nyni by pribyl i subnet pro vlan REPL

     deny   ip any 172.16.1.0 0.0.0.255

     permit ip any any

     

    interface TenGigabitEthernet2/1/3

     description 'Centrala'

     service-policy output PM-USER-TRAFFIC-RESERVATION

    Thank you in advance
    Josef



  • 2.  RE: QoS setting

     
    Posted 6 days ago
    I'm not very familiar with cisco syntax but that looks like it is a bandwidth limit filter which Junos would call policers.

    https://www.juniper.net/documentation/us/en/software/junos/routing-policy/topics/task/firewall-filter-ex-series-policer-cli.html

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------