I have an old chassis alarm that I can't get to go away on a pre-provisioned virtual chassis setup. FPC 4 was
removed from the chassis and powered down, but the old alarm for it is still showing. I've gone into a shell and manually restarted the alarmd service on the master and backup but it's still showing. Chassis running 12.3. Any idea how to clear this alarm for a virtual chassis member that was removed?
> show chassis alarms
1 alarms currently active
Alarm time Class Description
2022-01-11 10:45:02 MST Major FPC 4 PEM 0 is not supported
Virtual Chassis Mode: Mixed
Mstr Mixed Neighbor List
Member ID Status Serial No Model prio Role Mode ID Interface
1 (FPC 1) Prsnt 111111111111 ex4200-48p 0 Linecard Y 2 vcp-0
5 vcp-1
2 (FPC 2) Prsnt 222222222222 ex4200-48t 0 Linecard Y 3 vcp-0
1 vcp-1
3 (FPC 3) Prsnt 333333333333 ex4550-32f 129 Master* Y 2 vcp-255/2/0
5 vcp-255/2/2
5 vcp-255/2/3
5 (FPC 5) Prsnt 555555555555 ex4550-32f 129 Backup Y 1 vcp-255/2/0
3 vcp-255/2/2
3 vcp-255/2/3
------------------------------
ZANE Z
------------------------------