Security Management

 View Only


This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

Expand all | Collapse all

How to change role from Linecard to Backup

Jump to Best Answer
This thread has been viewed 0 times
  • 1.  How to change role from Linecard to Backup

    Posted 07-18-2014 09:21

    I currently have a virtual chassis with two EX4550s where one is the master and the other has the linecard role.  What is the best and easiest method for changing the member with the linecard role to the backup role with minimal/no downtime?




  • 2.  RE: How to change role from Linecard to Backup
    Best Answer

    Posted 07-18-2014 11:38



    You can check this link



    preprovisioned configuration from step.7 to step.9


    so you can choose the role of each switch based on the serial number. No downtime for user traffic, you might logout from the switch then you can login again after modifying the roles according to your config.