Security Management

 View Only
last person joined: 7 days ago 

Ask questions and share experiences on network security management solutions.

Welcome!

If you have a question or a use case, likely there are others who are experiencing or worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Knowledge Base Security Advisories Technical Bulletins

Latest Discussion Posts

  • Profile Picture

    Juniper SSR SDWAN Device - Hardening & Best Practi ...

    By: Stephen , 2 months ago

    Hi, We're looking to consolidate all the security hardening documentation in our internal knowledge base system. After reviewing we're missing hardening documentation related to SDWAN SSR products. Does this documentation exist? Is there a technical ...

  • Profile Picture

    Junos Space 22.1 R1 - [Schema is not ready. Resync ...

    By: WILLIAM BELCHER , 3 months ago

    Hello all! Merry Christmas! Following a fresh install of 22.1R1 and a restore of our Space environment we can't seem to Resync Network Elements on any managed devices. Tried restarting JBOSS, removing device and re-adding as managed device (which is ...

  • Profile Picture

    RE: Syslog Messages | chassisd[2982]: Cannot read hw.chassis.startup_time: ...

    By: Renata Silva , 4 months ago

    Good afternoon, was this problem solved in your box? i have the same problem here Oct 25 15:20:08 BB-BNG-PE-PAL-PALMARES-MX104-01 /kernel: hw.chassis.startup_time update to 1665672187.422463 ------------------------------ Renata Silva ---------- ...

  • Profile Picture

    RE: Security director insights

    By: Loki13 , 6 months ago

    Hi, Due to security reason, it is not exposed. Please contact JTAC and they will assist you. ------------------------------ Pravin Lokhande ------------------------------

  • Profile Picture

    SRX syslog integration with security director insi ...

    By: ASH SAM , 6 months ago

    Hello, Is there any document say that i can send traffic to the security director insights from SRX devices on TCP port and the number of the port ? Thank you. ------------------------------ ASh SAM ------------------------------

  • Profile Picture

    Security director insights

    By: ASH SAM , 6 months ago

    Hello Everyone , Is there any document guide about the shell setup CLI commands to security director insights? Thank you. ------------------------------ ASh SAM ------------------------------

  • Profile Picture

    RE: Security director

    By: kronicklez , 7 months ago

    Hi, If u want to see log srx on srx then u need to install Security Director Insight (SDI). Then import it to SD. Then configure SRX to point log to SDI. Thanks

Unanswered Posts

  • Juniper SSR SDWAN Device - Hardening & Best Practi ...

  • Junos Space 22.1 R1 - [Schema is not ready. Resync ...

  • SRX syslog integration with security director insi ...

  • Junos Space Stuck in Junos Space is preparing to start ...

  • Security Director - hit counter on all firewall rulse ...

Top Contributors in the Community