Security Management

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  Factory Reset from a NSM Appliance

    Posted 03-16-2009 06:24

    Hello,

    I have forgotten the root password from my NSM test appliance.

    How can I initiate a Factory Reset?

     

    Many thanks

     

    Frank



  • 2.  RE: Factory Reset from a NSM Appliance
    Best Answer

    Posted 03-16-2009 08:06

    This KB will assist you in recovering the root password

     

    http://kb.juniper.net/KB11470

     

    To restore the box to factory defaults, you can use http://kb.juniper.net/KB10372.

     

    Thanks,
    Chandra


    #Thank
    #for
    #the
    #you
    #information.


  • 3.  RE: Factory Reset from a NSM Appliance

    Posted 03-16-2009 23:59

    Thank you for the information.

     

     

    Franky



  • 4.  RE: Factory Reset from a NSM Appliance

     
    Posted 03-25-2009 21:22

    Don't forget to run through the inital setup (via admin login) or your upgrade will fail....

     

    I learned this the hard way... after three failed reset/upgrades.



  • 5.  RE: Factory Reset from a NSM Appliance

    Posted 03-06-2013 20:04

    Hi all,

     

     

    I'm stuck at step 12 for this KB. What exatly command "vi" to save the changes. Appreciate someone feedback