Junos OS

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  MX L2VPN Martini Draft

    Posted 01-09-2021 06:43
    Hi
    Browsing Feature Explorer I could not find support for L2VPN(Martini, compatible with Cisco Implementation for P2P L2VPN with VC type#4 VLAN support ) with this configuration on MX960.
    1- Is this configuration supported on MX Series?
    2- Is there any limitation on Supported MPCs?

    set protocols l2circuit neighbor 10.241.252.55 interface ae1.695 virtual-circuit-id 695
    set protocols l2circuit neighbor 10.241.252.55 interface ae1.695 no-control-word
    set protocols l2circuit neighbor 10.241.252.55 interface ae1.695 mtu 1500
    set protocols l2circuit neighbor 10.241.252.70 interface ae1.625 virtual-circuit-id 625
    set protocols l2circuit neighbor 10.241.252.70 interface ae1.625 no-control-word
    set protocols l2circuit neighbor 10.241.252.70 interface ae1.625 mtu 1500

    The above configuration was captured from a M320 Router
    Thank you
    Alireza

    ------------------------------
    Ali Soltan
    ------------------------------


  • 2.  RE: MX L2VPN Martini Draft

    Posted 01-10-2021 07:48
    Hi
    Would you please help me about this?
    Thank you

    ------------------------------
    Ali Soltan
    ------------------------------



  • 3.  RE: MX L2VPN Martini Draft

     
    Posted 01-10-2021 13:07
    Yes, the configuration is support on mx for all mpc types.  I've used it extensively and interop with Nokia as well.

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------



  • 4.  RE: MX L2VPN Martini Draft

    Posted 01-11-2021 04:32
    Thank you for the update. Just for checking:
    As far as I understood. this feature required certain license on the card
    for example: 
    - On MPC7E we need to use -RB license
    - On MPC10E we need to use S-MX-10C-P1-P or S-MX-10C-A1-P
    Is this correct?
    Thank you

    ------------------------------
    Ali Soltan
    ------------------------------



  • 5.  RE: MX L2VPN Martini Draft

    Posted 01-13-2021 00:14
    Hi
    Is this assumption correct?
    Thank you

    ------------------------------
    Ali Soltan
    ------------------------------



  • 6.  RE: MX L2VPN Martini Draft
    Best Answer

    Posted 01-10-2021 18:18
    Hi Ali,

    Yes, it is completely supported. No problem.

    Yours sincerely.


  • 7.  RE: MX L2VPN Martini Draft

    Posted 01-11-2021 04:34
    Hi Leonardo
    Thank you for the Answer

    ------------------------------
    Ali Soltan
    ------------------------------