Junos OS

Expand all | Collapse all

Command to check tacacs information

  • 1.  Command to check tacacs information

     
    Posted 08-03-2019 02:07

    Hi all, 

     

    Is there any command like Cisco's "show tacacs-server statistics" on JunOS? 

    I am adding few servers and I want to know if everything is fine from a Juniper device rather than having to check on the tacacs itself.

     

    I see that using monitor traffic is one way, but I am looking for a more specific purpose.

    Please share anything that you think might help.

     

    Thanks,

    Nex



  • 2.  RE: Command to check tacacs information

    Posted 08-03-2019 03:15
    Unfortunately, there is no command to check tacacs statistics like Cisco.


  • 3.  RE: Command to check tacacs information

     
    Posted 08-05-2019 10:08

    As mentioned in this techpubs documenation the step to verify is :: 

    From configuration mode, enter the show system tacplus-server command.

     

    https://www.juniper.net/documentation/en_US/junos/topics/topic-map/user-access-tacacs-authentication.html#jd0e749 

     

    There is no separate command from the operational mode to verify this. 

     

    Regards

    Arpit



  • 4.  RE: Command to check tacacs information

     
    Posted 08-08-2019 01:50

    Arpit,

     

    Thank you for the help. Yes the mentioned configurational command can be used to check the committed config and not the statistics though.

     

    Like you and Nellikka rightly mentioned, there seems to be no command unlike IOS.

     

    //Nex



  • 5.  RE: Command to check tacacs information

    Posted 12-31-2019 12:18

    General authentication traceoptions can be used, to check for connection details for TACACS. 

    https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/traceoptions-edit-system-processes.html



  • 6.  RE: Command to check tacacs information

    Posted 12-31-2019 12:53

    but it wont show the statistics though