Junos OS

Expand all | Collapse all

[REQ] qfx5100-48s-6q - parity error.

  • 1.  [REQ] qfx5100-48s-6q - parity error.

    Posted 04-02-2019 18:09

    Hi, ALL!

     

    I found that some logs about parity error.

    Does this log affect services? or Is the log automatically resolved?

     

    Apr 3 05:04:17.557 qfx5100-48s-6q fpc0 _soc_mem_array_sbusdma_read: FP_TCAM.ipipe0 failed(ERR)
    Apr 3 05:04:17.557 qfx5100-48s-6q fpc0 Received sbus ack has wrong opcode.
    Apr 3 05:04:17.632 qfx5100-48s-6q fpc0 SER Parity Check Error.
    Apr 3 05:04:17.636 qfx5100-48s-6q fpc0 SER Parity Check Error.
    Apr 3 05:04:17.640 qfx5100-48s-6q fpc0 Unit 0: FP_TCAM entry 1864 TCAM parity error
    Apr 3 05:04:17.641 qfx5100-48s-6q fpc0 Unit 0: mem: 1215=FP_TCAM blkoffset:10
    Apr 3 05:04:17.642 qfx5100-48s-6q fpc0 Unit 0: CLEAR_RESTORE: FP_TCAM[1215] blk: ipipe0 index: 1864 : [0][0]
    Apr 3 05:04:17.642 qfx5100-48s-6q fpc0 Unit 0: SER parity failure without valid error !!
    Apr 3 05:06:27.866 qfx5100-48s-6q fpc0 _soc_mem_array_sbusdma_read: FP_TCAM.ipipe0 failed(ERR)
    Apr 3 05:06:27.867 qfx5100-48s-6q fpc0 Received sbus ack has wrong opcode.
    Apr 3 05:06:27.868 qfx5100-48s-6q fpc0 SER Parity Check Error.
    Apr 3 05:06:27.868 qfx5100-48s-6q fpc0 Unit 0: FP_TCAM entry 1865 TCAM parity error
    Apr 3 05:06:27.869 qfx5100-48s-6q fpc0 Unit 0: mem: 1215=FP_TCAM blkoffset:10
    Apr 3 05:06:27.869 qfx5100-48s-6q fpc0 Unit 0: CLEAR_RESTORE: FP_TCAM[1215] blk: ipipe0 index: 1865 : [0][0]

     

    I want you guys to me explain in detail! 

    Thanks in Advance, 😄

     



  • 2.  RE: [REQ] qfx5100-48s-6q - parity error.

     
    Posted 04-02-2019 20:08

    These were actual parity errors detected by SER logic, and also have been cleared.

    CLEAR_RESTORE message indicates that, the corresponding entries at those indexes (where the parity is reported) are cleared.

    If you see CLEAR_RESTORE or CACHE_RESTORE message after parity error message, then they indicate that parity was detected and cleared or corrected. CLEAR_RESTORE: Entry that reported the parity error is cleared by SER logic CACHE_RESTORE: Entry that reported the parity error is restored from the Cache. So this messages are expected and are informal that error was corrected by system.



  • 3.  RE: [REQ] qfx5100-48s-6q - parity error.

    Posted 04-02-2019 20:23

    Hi!! 🙂

     

    Thanks for your reply,

    However, I want to know that What SER logic is.

    I want to know SER logic in detail.

    such as, SER logic's role and fuction, etc..

     

    Thanks in Advance, 😄 😄



  • 4.  RE: [REQ] qfx5100-48s-6q - parity error.

    Posted 04-03-2019 01:51

    Hi,

     

    SER stands for Software Error Recovery. This is functionality, which automates the recovery of soft memory parity errors. E.g. this is a resilency feature.

     

    Regards,

    Roman