Junos OS

Expand all | Collapse all

SNMP filtering, allowing only specific OID

Jump to Best Answer
  • 1.  SNMP filtering, allowing only specific OID

    Posted 05-15-2017 23:49

    just want to "include" following oids

    what will commands for "snmp view test oid ......... ?"

     

    .iso.org.dod.internet.mgmt.mib-2.system.

    .iso.org.dod.internet.mgmt.mib-2.interfaces.

     

     



  • 2.  RE: SNMP filtering, allowing only specific OID
    Best Answer

    Posted 05-16-2017 05:39

    Hello there,

    http://www.networksorcery.com/enp/protocol/snmp/mibs.htm#iso.org.dod.internet.mgmt.mib-2

    .iso.org.dod.internet.mgmt.mib-2.system.                            1.3.6.1.2.1.1
    .iso.org.dod.internet.mgmt.mib-2.interfaces.                        1.3.6.1.2.1.2

    HTH

    Thx

    Alex

    P.S. the link above is the top one when You paste "iso.org.dod.internet.mgmt.mib-2.system" string into google.com.

     



  • 3.  RE: SNMP filtering, allowing only specific OID

    Posted 05-21-2017 06:30

    thanks ... after multiple hit n try

     

    found out MIBs are enough to manage juniper MX

    this will protect again SNMPWALK hi-cpu also

     

    view sys {
        oid system include;
        oid ifMIB include;

        oid interfaces include;
        oid juniperMIB include;
        oid hrStorage include;



  • 4.  RE: SNMP filtering, allowing only specific OID

     
    Posted 05-20-2017 06:05

    You can also use the Juniper MIB explorer to get OID from the tree or vice versa

     

    https://apps.juniper.net/mib-explorer/navigate.jsp