Junos OS

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  J-Flow Licenses for J-Series?

    Posted 04-25-2010 01:45

    Hi All,

     

    I have a pair of J-4350s running 9.0R1.10 - they've worked very well since installation, so I haven't seen a need to update the firmware.

     

    I now have a requirement to enable J-Flow. I understand it used to be necessary to license this feature, but can't seem to find these available anymore.

     

    There are also suggestions elsewhere on these forums that this is now free.

     

    Are licenses still required? If not, when did this change? Are there requirements to be running a particular release of the software?

     

    Thanks,

    Jonathan


    #J-Series
    #j-flow
    #JUNOS


  • 2.  RE: J-Flow Licenses for J-Series?
    Best Answer

    Posted 04-25-2010 07:53

    Hello there,

     

    AFAIK, JFlow License for J-Series  is only required pre JUNOS 9.5 and the license restriction has been lifted from 9.5 onwards.

    So if You want a free Jflow license You'd have to upgrade.

    HTH

    Regards

    Alex 

     



  • 3.  RE: J-Flow Licenses for J-Series?

    Posted 05-01-2010 19:34

    Thanks Alex,

     

    This is exactly right - looks like I have an upgrade to the latest JunOS to start planning 🙂