Junos OS

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Expand all | Collapse all

effect of traffic-engineering bgp-igp-both-ribs on IPv6 routes

Jump to Best Answer
  • 1.  effect of traffic-engineering bgp-igp-both-ribs on IPv6 routes

    Posted 04-27-2016 09:09

    Hello,

     

    Does the command traffic-engineering bgp-igp-both-ribs have any effect on IPv6 routes iin inet6.3 table? in my lab, I have not been able to observe the replication of inet6.3 routes in inet6.0. is this expected behaviour or might I have missed something?

     

    Mu OS version in 12.1

     

    thank you.


    #MPLSIPv6Trafficengineering


  • 2.  RE: effect of traffic-engineering bgp-igp-both-ribs on IPv6 routes
    Best Answer

     
    Posted 04-27-2016 16:50

    This is the expected behavior.  The command only copies routes from the inet.3 table into the inet.0 table.  Thus there is no effect on IPv6 routes.



  • 3.  RE: effect of traffic-engineering bgp-igp-both-ribs on IPv6 routes

    Posted 04-28-2016 14:10

    thank you.