Junos OS

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Expand all | Collapse all

Commands for port forwarding on Juniper SRX 240 running JUNOS 10.4R8.5 built?

This thread has been viewed 1 times
  • 1.  Commands for port forwarding on Juniper SRX 240 running JUNOS 10.4R8.5 built?

    Posted 09-03-2014 11:56

    Good Day,

     

    I need the commands to forward port (lets say 1234) from outside traffic to an internal ip (lets say 10.10.10.50).

     

    i have the Juniper SRX Series book by O'Reilly. It has too much resources for me to handle right now since we need this solution quick.

     

    I have Juniper Firewall SRX 240 running JUNOS 10.4R8.5.

     

    Anyone can help?


    #static-nat
    #NAT
    #port-forwarding
    #JUNOS


  • 2.  RE: Commands for port forwarding on Juniper SRX 240 running JUNOS 10.4R8.5 built?

    Posted 09-03-2014 17:40

    See the step by step instructions on page 9 of the NAT pdf file posted as TN81.

     

    http://kb.juniper.net/InfoCenter/index?page=content&id=TN81

     

    You are using one to many destination nat pools.  You define the specific ip address and port in your pool then create the nat rule that forwards to this ip and port.