Hello everybody, I'm configuring an EX2200-C with firmware 15.1 but i'm facing a strange problem.
Both the LLDP service and the web management interface don't start: if I "restart" the processes, the system replies with:
lldpd-service subsystem not running - not needed by configuration
web-management subsystem not running - not needed by configuration
My configuration has the following statements:
Any suggestion will be greatly appreciated.
Can you remove them, commit and then add them again?=====If this worked for you please flag my post as an "Accepted Solution" so others can benefit. A kudo would be cool if you think I earned it.
Hello parau, I did it for the lldp protocol but it didn't work.
Any logs recorded about LLDP? Are there any core-dumps? Do you see lldpd on "show system processes extensive?=====If this worked for you please flag my post as an "Accepted Solution" so others can benefit. A kudo would be cool if you think I earned it.
Hello parau, I found no logs about lldp nor core dumps.
I chose to
request system zeroize
and, after running ezsetup and rebuilding the configuration, everything started working again.
Thank you for your help,
We also had the same problem and have fixed by resetting to factory defaults and running ezsetup. We've deleted and re-setted most parts of the config before resetting to factory defaults but we couldn't enable the lldp service by those actions.
I had the same issue today with version 15.1R3
You may be facing this bug :
On EX Series or QFX Series switches, if the switch is power cycled, then some processes (such as jdhcp, lacp, and lldpd) might stop working after the switch reboots.
Resolved In Release junos16.1R4-S3 x17.1R2 x17.2R1 x16.1R3-S4 x16.2R2 x15.1R6 x16.1R5 x15.1X53-D65 x15.1X53-D231 x
WorkaroundFirst disable the DHCP/LACP/LLDP config which does not work
Then on shell:
# cd /var/run/db# rm schema.db.cache# mgd -I# ps -auxw | grep mgd# kill -9 "pid of mgd -N" <------- "Restart mgd -N". After this step only "mgd -N" will pick the new schema.db and now when we start new cli, "mgd -N" will fork service mgd with new schema.dbNow enter the cli and enable DHCP/LACP/LLDP config and commit | display detail