Routing

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  MX 960 Flow based QOS, specifucally user based Rate-limiting or not ?

    Posted 12-08-2018 23:42

    Hello Team,

     

    as a partner , we need some clarity on Juniper MX960 platform .

     

    Does Juniper MX960 support Flow based QOS, specifucally user based Rate-limiting or not . ?

    USE CASE-  Internet SP BNG

    We know that it supports DPI, Rate-limit (based on a percentage of physical port speed on an interface)

    and can do Application Aware QoS – but it requires the MS-MPC

     https://www.juniper.net/assets/us/en/local/pdf/datasheets/1000498-en.pdf

     

    But do MX960 really supports flow based QOS specifucally user based Rate-limiting or not . ? 

     

    We would really appreciate your quick response . Thanks in advance


    #JUNOS
    #sp
    #bng
    #mx
    #QOS
    #routing
    #MX960


  • 2.  RE: MX 960 Flow based QOS, specifucally user based Rate-limiting or not ?
    Best Answer

    Posted 12-09-2018 04:45

    Hello,

    You can assign an input/output filter with policer via dynamic-profile if that's Your question.

    You can find several config examples on this forum.

    Such as this one for PPP subs https://forums.juniper.net/t5/Routing/Controlling-PPP-Users/m-p/314981

    HTH

    Thx

    Alex



  • 3.  RE: MX 960 Flow based QOS, specifucally user based Rate-limiting or not ?

    Posted 12-10-2018 06:21

    Hi aarseniev, 

     

    Thank for quick update, this is realy helpful insights . 

     

    Do you know if it requires the MS-MPC for this ? We would appreciate your quick response .



  • 4.  RE: MX 960 Flow based QOS, specifucally user based Rate-limiting or not ?

    Posted 12-10-2018 10:04

    Hello,

    No, MS-MPC is not required for regular BNG/BRAS/LNS functionality including filters with policers.

    MS-MPC is required for advanced functionality such as CGNAT, Jflow v9 (albeit Jflowv9 can be done in regular MPC as well), DPI, server load-balancer/TLD, HTTP Header enrichment, and the like.

    HTH

    Thx
    Alex