Routing

Expand all | Collapse all

Can any way to change inet3.0 metric that mapped from inet.0

Jump to Best Answer
  • 1.  Can any way to change inet3.0 metric that mapped from inet.0

    Posted 09-24-2018 20:52

    Below inet.3 has a RSVP route 2.2.2.2/32 and its metric follows inet.0 ospf metric 101.

    Can it has any way to only change inet3.0 2.2.2.2/32 metric 101 to metric 50?

    Thanks.

     

    inet.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)

    Restart Complete + = Active Route, - = Last Active, * = Both

     

    1.1.1.1/32 *[OSPF/10] 9w0d 19:31:39, metric 100

                               to 1.7.57.5 via xe-3/0/0.0

                           > to 1.7.58.21 via xe-5/0/0.0

                               to 1.7.155.217 via xe-5/2/0.0

     

    2.2.2.2/32 *[OSPF/10] 56w0d 08:08:22, metric 101

                               > to 1.7.10.54 via ae3.0

     

    inet.3: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)

    Restart Complete + = Active Route, - = Last Active, * = Both

     

    1.1.1.1/32 *[RSVP/7/1] 56w0d 08:03:37, metric 100

                              to 1.7.155.217 via xe-5/2/0.0, label-switched-path TX1_N1_01

                          > to 1.7.57.5 via xe-3/0/0.0, label-switched-path TX1_N1_02

                              to 1.7.58.21 via xe-5/0/0.0, label-switched-path TX1_N1_03

     

    2.2.2.2/32 *[RSVP/7/1] 56w0d 08:07:55, metric 101

                               > to 1.7.107.54 via ae3.0, label-switched-path TX1_N2_01

                                   to 1.7.107.54 via ae3.0, label-switched-path TX1_N2_02

                                   to 1.7.107.54 via ae3.0, label-switched-path TX1_N2_03


    #routing


  • 2.  RE: Can any way to change inet3.0 metric that mapped from inet.0
    Best Answer

    Posted 09-25-2018 00:14

    Hello,

    Please see if the following helps:

     

    set protocols mpls label-switched-path TX1_N2_01 metric 50

     

    HTH

    Thx

    Alex