Routing

 View Only
last person joined: 4 days ago 

Ask questions and share experiences about ACX Series, CTP Series, MX Series, PTX Series, SSR Series, JRR Series, and all things routing, including portfolios and protocols.

  • 1.  LAG bundle on ACX 17.3R2.10 only uses one interface

    Posted 07-27-2018 02:23

    Hi Folks!

    Any body using Junos 17.3R2.10 on ACX (2200)s?

    It seems, since upgrading, that all our LAG bundles are only using a single interface in the bundle causing capacity issues...

    I've configured the hashing in forwarding-options, but it made no difference.

    Anybody else seen this? Anybody else got any ideas?

    Thanks in advance for any trouble taken...!

     



  • 2.  RE: LAG bundle on ACX 17.3R2.10 only uses one interface
    Best Answer

    Posted 07-30-2018 09:38

    In case anybody else here via google in the future...

    Turns out there is no default hash-key algorithm setting for the LAG.

    You must explicitly

    set forwarding-options hash-key family inet layer-3
set forwarding-options hash-key family multiservice source-mac
set forwarding-options hash-key family multiservice destination-mac

    Then, and only then, layer 2 and layer 3 traffic will be load balanced across all physical links in the bundle...