Routing

Expand all | Collapse all

Show CPU history

Jump to Best Answer
  • 1.  Show CPU history

    Posted 01-18-2018 18:07

    Do we have any commands equals to "show cpu history " in cisco. 

     

    I want to check a customers utilization for yesterday



  • 2.  RE: Show CPU history

    Posted 01-18-2018 18:18

    It’s there, not exactly but yeah you will get the utilization details of few intervals as below.

    root@PE1_re> show chassis routing-engine
    Routing Engine status:
    Slot 0:
    Current state Master
    Election priority Master (default)
    DRAM 4071 MB (4096 MB installed)
    Memory utilization 27 percent


    5 sec CPU utilization:
    User 1 percent
    Background 0 percent
    Kernel 0 percent
    Interrupt 4 percent
    Idle 95 percent


    1 min CPU utilization:
    User 1 percent
    Background 0 percent
    Kernel 1 percent
    Interrupt 3 percent
    Idle 95 percent

     


    5 min CPU utilization:
    User 1 percent
    Background 0 percent
    Kernel 1 percent
    Interrupt 3 percent
    Idle 96 percent

     


    15 min CPU utilization:
    User 1 percent
    Background 0 percent
    Kernel 1 percent
    Interrupt 3 percent
    Idle 96 percent


    Model RE-VMX
    Start time 2017-12-09 05:37:11 PST
    Uptime 40 days, 12 hours, 39 minutes, 10 seconds
    Last reboot reason 0x200:normal shutdown
    Load averages: 1 minute 5 minute 15 minute
    0.00 0.01 0.00

     

    root@PE1_re>



  • 3.  RE: Show CPU history
    Best Answer

    Posted 01-18-2018 18:28

    For yesterday's utilization, you will need to check the CPU graph only in your monitoring tools.



  • 4.  RE: Show CPU history

    Posted 01-18-2018 19:37

    It will show the current CPU utilization right. 

     

    I need history  like alternate for SNMP graph



  • 5.  RE: Show CPU history

    Posted 01-18-2018 21:01

    No, You can only check last 5 second, 1,5 and15 minutes CPU usages.

     

    For a previous day or last 24 hrs, you will need to chceck in monitoring tool/snmp graph.